Primary aluminium (P1020A ingot, alloy sheet, billet, extrusion, wire rod, foil) and copper (LME Grade A cathode, rod, sheet, tube) supplied under formal Sale and Purchase Agreements with EN 10204 mill certificates and SGS / Bureau Veritas inspection at load port. Bulk and packaged supply to industrial buyers, manufacturers and traders in 55+ countries.
From primary P1020A ingot to alloy sheet, extruded profiles, wire rod and foil. All aluminium supplied with EN 573 / ASTM B209 compliant mill certificates and EN 10204 3.1 documentation.
The global benchmark primary aluminium grade. Al ≥99.70%, Fe ≤0.20%, Si ≤0.10%. Produced by electrolytic reduction of alumina (Hall–Héroult process). LME-registered brands accepted. T-bar, sow and standard ingot (15–22 kg) forms. The standard feedstock for aluminium remelting, alloying and casting operations. Priced at LME Aluminium spot ± premium.
Casting and wrought alloy ingots for remelting and secondary production. 1050 / 1060 / 1100 (pure Al series) for chemical and electrical applications. 3003 / 3105 for packaging and roofing sheet. 5052 / 5083 / 5086 for marine, pressure vessel and automotive. Supplied in standard ingot or T-bar form. Chemical composition certified per EN 573-3 or ASTM B209 as required.
Hot-rolled and cold-rolled aluminium sheet and coil across the 1xxx–7xxx alloy series. 1050/1100: pure Al, chemical equipment and general use. 3003: moderate strength, roofing and HVAC duct. 5052/5083: high strength, marine and pressure vessel. 6061: heat-treatable, structural. 7075: aerospace-grade, highest strength aluminium alloy. Mill finish (F), annealed (O), strain-hardened (H) and solution heat-treated (T) tempers available.
Homogenised direct-chill cast billets for extrusion press feed. 6060 and 6063: standard architectural and industrial extrusion, anodising quality, T5/T6 temper. 6082: higher strength structural extrusion (bridges, load-bearing frames). 7075: aerospace and high-performance structural billet (T6/T73 temper). Diameter range 76–406 mm. Billet length to customer specification. Supplied with homogenisation certification and EN 573-3 chemical analysis.
Hot-extruded aluminium profiles in standard and custom cross-sections. 6060/6063 T5/T6: standard architectural — window frames, curtain wall, door sections, solar mounting. 6082 T6: structural — load-bearing frames, transportation, industrial. Available in mill finish, anodised (Class 10/20 per EN 12373) and powder-coated (RAL) surface treatment. Standard lengths 6 m / 12 m; cut-to-length on request. Supplied with EN 755 dimensional and mechanical certification.
Continuously cast and rolled (CCR) aluminium wire rod for electrical conductor applications. EC grade 1350-H19 (Al ≥99.50%, conductivity ≥61% IACS). Diameter 9.5 mm and 12 mm standard. Used as feedstock for overhead transmission conductors (ACSR, AAAC, ACAR), building wiring (THHN/THWN), power cable conductors and motor winding wire. Supplied in coil form (1,000–2,500 kg), shrink-wrapped on steel reel. ENEC / IEC 60104 certified.
Cold-rolled aluminium foil for flexible packaging, pharmaceutical blister packs, food service, HVAC duct lining and thermal insulation. Alloys 1235 and 8011 (standard packaging foil); 1100 (heavy gauge industrial foil). Thickness range 0.006–0.2 mm. Width to customer specification. Tempers: soft (O) for packaging; semi-rigid (H22) for container and household foil; rigid (H18) for industrial. Supplied on paper core in mill-wrapped rolls.
Seamless drawn aluminium tube and extruded pipe for HVAC, refrigeration, hydraulic and structural applications. 3003-O: heat exchanger and refrigerant tubing. 6061/6063-T6: structural and hydraulic cylinders. OD range 6–250 mm, wall 0.5–20 mm. Available in straight lengths and coiled form (small diameters). Anodised and bright-dipped surface options. Supplied with EN 754 dimensional and EN 10204 3.1 mechanical certification.
Heavy gauge aluminium plate (6–200 mm) for structural, marine, aerospace and tooling applications. 5083-H321: the global standard for shipbuilding, offshore and cryogenic vessel construction (LNG) — excellent weldability, seawater corrosion resistance. 6061-T651: structural tooling plate, moulds, fixtures. 7075-T651: aerospace, high-stress structural components. All plate supplied with ultrasonic testing and EN 10204 3.2 certification on request.
Copper cathode (Cu-CATH-1, ≥99.99%) is the LME delivery standard and the feedstock for all copper product forms. International Trade Group supplies cathode and all downstream semi-fabricated products with full traceability.
Electrolytic copper cathode conforming to EN 1978 Cu-CATH-1 specification (Cu+Ag ≥99.99%). The LME delivery standard and global primary copper benchmark. Produced by electrolytic refining of blister copper. Standard cathode dimensions 914×914 mm, weight 110–125 kg each, bundled in 2 MT parcels. Priced at LME Copper Grade A spot ± premium. Origin: Chile, Peru, DRC, Zambia. LME-registered brands available.
Continuously cast and rolled (Properzi/CCR process) copper wire rod, the primary feedstock for the global wire and cable industry. ETP grade (Cu-ETP / C11000): electrolytic tough pitch, Cu ≥99.90%, conductivity ≥100% IACS — standard for power cable, building wire and transformer winding. OFE grade (Cu-OF / C10200): oxygen-free, Cu ≥99.95% — for audio/video cables, medical equipment and high-frequency applications. Standard diameter 8 mm; 12 mm available. Coil weight 3–5 MT.
Hot-rolled and cold-rolled copper flat products. C11000 (ETP): standard electrical and construction sheet, roofing, gutters, decorative cladding. C12200 (DHP — deoxidised high phosphorus): for tube/pipe fabrication, plumbing fittings and brazing applications. Thickness 0.5–50 mm. Width up to 1,500 mm. Tempers: soft (R200), half-hard (R240), hard (R290), spring (R360). Supplied in sheet, slit coil or plate form. EN 10204 3.1 certification standard.
Seamless copper tube (C12200 DHP) for plumbing, HVAC, refrigeration and medical gas systems. EN 1057 covers dimensions and tolerances for plumbing and heating tubes (Type X, Y, Z wall thicknesses). ASTM B88 for US-specification projects (Type K, L, M). OD range 6–250 mm. Available in straight lengths (3 m / 5 m) and coiled form (small diameters ≤28 mm). Phosphorus deoxidised grade ensures clean brazing/soldering without hydrogen embrittlement. Also supplied in ACR (air conditioning and refrigeration) grade.
Extruded and rolled copper bus bars and shaped conductors for electrical power distribution, switchgear, transformers and busduct systems. Cu-ETP (C11000): standard for all power distribution bus applications. Cu-OF (C10200): for high-frequency and sensitive applications. Rectangular bar sections 10×3 mm to 160×30 mm; round bar Ø6–100 mm; custom L, U and T profiles available. Conductivity ≥100% IACS. Supplied in 3 m / 6 m straight lengths. EN 10204 3.1 cert standard.
Copper alloy products: Brass (Cu-Zn): CW614N (CuZn39Pb3) — the global standard free-machining brass for fittings, valves and precision turned parts; CW508L (CuZn37) — cartridge brass, deep-drawing sheet; CW702R (CuZn20Al2) — high-strength aluminium brass. Bronze (Cu-Sn): CW453K (CuSn8) — spring and bearing bronze; CW456K (CuSn4) — electrical connector strip. Phosphor bronze (CW451K) for springs, contacts and bearings. Rod, bar, sheet, strip, tube and hollow section forms.
| Grade / Alloy | Al % | Fe Max | Si Max | Cu Max | Key Properties | Standard |
|---|---|---|---|---|---|---|
| P1020A Ingot | ≥99.70 | 0.20% | 0.10% | 0.01% | Primary smelter grade, LME registered | EN 576 |
| 1050 / 1100 | ≥99.50 / 99.00 | 0.40% | 0.25% | 0.05% | High conductivity, chemical resistance | EN 573-3 |
| 3003 / 3105 | Bal. | 0.70% | 0.60% | 0.20% | Mn-alloyed, moderate strength, formable | EN 573-3 |
| 5052 / 5083 | Bal. | 0.40% | 0.25% | 0.10% | Mg-alloyed, high strength, marine grade | EN 573-3 |
| 6061 / 6063 | Bal. | 0.70% | 0.60% | 0.35% | Mg+Si, heat-treatable, T6 structural | EN 573-3 |
| 7075 | Bal. | 0.50% | 0.40% | 2.0% | Zn+Mg+Cu, highest strength Al alloy | EN 573-3 |
| EC 1350 Wire Rod | ≥99.50 | 0.40% | 0.10% | 0.02% | Electrical grade, ≥61% IACS | IEC 60104 |
| Grade / Designation | Cu % | Conductivity | Key Properties | Primary Use | Standard |
|---|---|---|---|---|---|
| Cu-CATH-1 (LME Grade A) | Cu+Ag ≥99.99 | — | LME registered, electrolytic cathode | Feedstock / Primary commodity | EN 1978 |
| Cu-ETP (C11000) | ≥99.90 | ≥100% IACS | Tough pitch, oxygen ~250 ppm | Wire rod, cable, bus bar | IEC 60028 |
| Cu-OF (C10200) | ≥99.95 | ≥100% IACS | Oxygen-free, no hydrogen embrittlement | Electronics, OFE cable | ASTM B170 |
| Cu-DHP (C12200) | ≥99.85 | ≥85% IACS | Phosphorus deoxidised, brazeable | Tube, pipe, plumbing | EN 1057 |
| CW614N (CuZn39Pb3) | ~58–60 | — | Free-machining brass, Pb 2.5–3.5% | Fittings, valves, turned parts | EN 12163 |
| CW453K (CuSn8) | ~91.2 | — | Phosphor bronze, Sn 7.5–8.5% | Springs, bearings, connectors | EN 12163 |
| Parameter | Detail |
|---|---|
| Minimum Order | 20–50 MT for most non-ferrous grades · Cathode: 25 MT (1 bundle = 2 MT × ~12) · Wire rod: 1 coil minimum |
| Pricing Reference | LME Aluminium (3-month) + MW / Rotterdam / Japan premium · LME Copper Grade A (3-month) + premium |
| Delivery Terms | FOB · CIF · CFR · DAP · DDP — Incoterms 2020 |
| Packaging | Ingot: bundled on timber dunnage · Cathode: banded bundles · Sheet/Coil: mill-wrapped, wooden pallet · Rod: coil on steel reel · Tube: straight lengths in bundle |
| Mill Certificates | EN 10204 3.1 standard · 3.2 third-party countersigned on request |
| Inspection | SGS / Bureau Veritas / Intertek at load port — mandatory |
| Payment | Staged wire transfer · D/P · escrow — documented in written SPA |
| Documents | B/L · COO · Mill Certificate (EN 10204 3.1) · Weight Certificate · SGS/BV Inspection Report · Commercial Invoice |
Enquire about aluminium & copper supply
P1020A Ingot · Alloy Sheet · Billet · Extrusion · Wire Rod · Foil · LME Cathode · Copper Rod · Bus Bar · Brass · Bronze